SAP-201V stereo integrated amplifier with DAC

A solidly built stereo amplifier featuring audiophile grade components throughout including a toroidal transformer, a feature not usually found in budget amps. It also has a built-in Wolfson Micro WM8761 chip making this amp one of the first in its price category to offer a built in DAC. This amplifier performs well above what would usually be expected from a product of this price. Needs to be heard to be believed! Available in silver or black finish.


  • 4 RCA analog inputs for CD, Netplayer, TV and Aux
    allowing for all potential input needs. Plus a phono stage
    for a turntable with Moving Magnet cartridge.
  • PLUS 3.5mm Line-In jack on front panel for MP3 player or
    other portable sound source.
  • COAX and Optical digital
    inputs allowing two digital sources to be connected.


  • 4mm banana plug brass speaker terminals with plastic screw threaded tension nuts for bare-wire connection to loudspeakers.
  • Record out circuit for connection to a slave amplifier or active speaker.
  • Front panel ¼ inch headphone socket.

Back View of SAP201V Amplifier

SAP-201V stereo digital amplifier specifications

Rated Output Power

  • 40 W at 8 ohms, 2 ch driven, 1 kHz, 0.8 % THD (IEC)
  • 50 W at 4 ohms, 2 ch driven, 1 kHz, 0.8 % THD (IEC)

Dynamic Power

  • 150W

THD (Total Harmonic Distortion)

  • 0.08 % (1 kHz 1 W)

Damping Factor

  • 60 (Front’1 kHz’8 )

Input Sensitivity and Impedance

  • 250 mV/47 k(LINE)
  • 6.5 mV/47 k(PHONO)

Output Level and Impedance

  • 250 mV/47k(REC OUT)

Phono Overload

  • 60 mV (MM 1 kHz 0.5 %)

Frequency Response

  • 20 Hz-50 kHz/+1 dB-3 dB (LINE)
  • +14 dB, -14 dB, 100 Hz (BASS)

Tone Control

  • +14 dB, -14dB, 10 kHz (TREBLE)
  • +0 dB, -14 dB (BALANCE)

Signal to Noise Ratio

  • >85dB (LINE, IHF-A) 61 dB (PHONO, IHF-A)

Speaker Impedance

  • 4 ohm, 8 ohm, 16 ohm

Digital Inputs

  • OPTICAL 1 (Rear), COAXIAL 1 (Rear)

Digital to Analog Converter

  • Wolfson Micro WM8761 upto 24 bit 192kHz sampling rate

Analog Inputs


Analog Outputs



  • 1 x 1/4″ (FRONT)

Power Supply

  • AC 230V, 50/60 Hz toroidal audio grade PSU

Power Consumption

  • Max 250W


  • (WxHxD) : 430 x 80 x 283 mm


  • 6.3 kg

User manual can be downloaded here

SAP201 amplifier